Nanoscaled Bionic Periosteum Orchestrating the Osteogenic Microenvironment for Sequential Bone Regeneration.

Periosteum orchestrates bone repair. Previously developed artificial periosteum was mainly focusing on materials modification to simply enhance bone formation, but few were attempting to make the artificial periosteum fit different bone repair stages. Here, we constructed a functionalized periosteum, which was composed of an electrospun scaffold grafted with leptin receptor antibody (LepR-a) and BMP2-loaded hollow MnO2 (h-MnO2) nanoparticles through a polydopamine (PDA)-assisted technique. The bionic periosteum showed suitable mechanical properties and favorable biocompatibility. It effectively recruited skeletal stem cells (SSCs) through antigen-antibody interactions, as in in vitro cell adhesion tests, we observed that more SSCs attached to the LepR-a-grafted periosteum compared to the control group. In vivo, the LepR-a-grafted periosteum covered on the cranial defect in Prx1-Cre/ERT2, -EGFP mice recruited more Prx1-EGFP cells to the fracture site compared to control groups at post-surgery day 3, 7, and 14. Co-staining with Sp7 indicated that most of the recruited Prx1-EGFP cells underwent osteogenic lineage commitment. Sustained BMP2 release from h-MnO2 promoted osteogenesis by accelerating the osteogenic differentiation of recruited SSCs, as demonstrated by alkaline phosphatase (ALP) and alizarin red staining (ARS) in vitro and microcomputed tomography (micro-CT) in vivo. Interestingly, we also observed the growth of osteogenic coupled capillaries (CD31hiEmcnhi) in the bone repair site, which might be induced by increased platelet-derived growth factor-BB (PDGF-BB) in the regenerative microenvironment subsequent to SSCs' differentiation. Taken together, the findings from this study indicate that the multifunctionalized periosteum efficiently recruited and motivated the SSCs in vivo and orchestrated the osteogenic microenvironment for bone repair in a sequence manner. Thus, the construction of the bionic periosteum to couple with natural bone regeneration stages has been demonstrated to be effective in facilitating bone healing.

Experimental validation of biocompatible nanostructured lipid carriers of sophorolipid: Optimization, characterization and in-vitro evaluation.

To date, the potential of sophorolipids (an important class of glycolipids) has been exploited solely as amphipathic molecules but their ability to formulate lipid nanoparticles has never been explored. In this report, for the first time, lipid nanostructures coated with polysorbates (Tweens) were formulated by a hot dispersion method. By varying the amount of lipid, type of surfactant, and alcohol, dilution ratio etc., the formulation was optimized with respect to its stability, which is a central aspect of their potential applications. Their comprehensive physicochemical characterization was done using static and dynamic light scattering (SLS, DLS), small angle neutron scattering (SANS), zeta-potential, transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM) techniques. Further hemolysis study was conducted to understand the in-vitro cytotoxicity levels of the lipidic nanoparticles prior to its application as a potent drug delivery device for countermanding the problems associated with challenging tuberculosis and leprosy drug-Rifampicin. Attaining high entrapment efficiency and sustained release from the developed carrier, further interaction with bovine serum albumin was investigated, to understand the in-vivo behavior of the nanostructured lipid carriers (NLCs).

Production and characterization of bacterial cellulose membranes with hyaluronic acid from chicken comb.

The bacterial cellulose (BC), from Gluconacetobacter hansenii, is a biofilm with a high degree of crystallinity that can be used for therapeutic purposes and as a candidate for healing wounds. Hyaluronic acid (HA) is a constitutive polysaccharide found in the extracellular matrix and is a material used in tissue engineering and scaffolding for tissue regeneration. In this study, polymeric composites were produced in presence of hyaluronic acid isolated from chicken comb on different days of fermentation, specifically on the first (BCHA-SABT0) and third day (BCHA-SABT3) of fermentation. The structural characteristics, thermal stability and molar mass of hyaluronic acid from chicken comb were evaluated. Native membrane and polymeric composites were characterized with respect to their morphology and crystallinity. The optimized process of extraction and purification of hyaluronic acid resulted in low molar mass hyaluronic acid with structural characteristics similar to the standard commercial hyaluronic acid. The results demonstrate that the polymeric composites (BC/HA-SAB) can be produced in situ. The membranes produced on the third day presented better incorporation of HA-SAB between cellulose microfiber, resulting in membranes with higher thermal stability, higher roughness and lower crystallinity. The biocompatiblily of bacterial cellulose and the importance of hyaluronic acid as a component of extracellular matrix qualify the polymeric composites as promising biomaterials for tissue engineering.

Investigating the Dispersion Behavior in Solvents, Biocompatibility, and Use as Support for Highly Efficient Metal Catalysts of Exfoliated Graphitic Carbon Nitride.

The liquid-phase exfoliation of graphitic carbon nitride (g-C3N4) to afford colloidal dispersions of two-dimensional flakes constitutes an attractive route to facilitate the processing and implementation of this novel material toward different technological applications, but quantitative knowledge about its dispersibility in solvents is lacking. Here, we investigate the dispersion behavior of exfoliated g-C3N4 in a wide range of solvents and evaluate the obtained results on the basis of solvent surface energy and Hildebrand/Hansen solubility parameters. Estimates of the three Hansen parameters for exfoliated g-C3N4 from the experimentally derived data yielded δD ≈ 17.8 MPa(1/2), δP ≈ 10.8 MPa(1/2), and δH ≈ 15.4 MPa(1/2). The relatively high δH value suggested that, contrary to the case of other two-dimensional materials (e.g., graphene or transition metal dichalcogenides), hydrogen-bonding plays a substantial role in the efficient interaction, and thus dispersibility, of exfoliated g-C3N4 with solvents. Such an outcome was attributed to a high density of primary and/or secondary amines in the material, the presence of which was associated with incomplete condensation of the structure. Furthermore, cell proliferation tests carried out on thin films of exfoliated g-C3N4 using murine fibroblasts suggested that this material is highly biocompatible and noncytotoxic. Finally, the exfoliated g-C3N4 flakes were used as supports in the synthesis of Pd nanoparticles, and the resulting hybrids exhibited an exceptional catalytic activity in the reduction of nitroarenes.

Enriched glucose and dextrin mannitol-based media modulates fibroblast behavior on bacterial cellulose membranes.

Bacterial cellulose (BC) produced by Gluconacetobacter hansenii is a suitable biopolymer for biomedical applications. In order to modulate the properties of BC and expand its use as substrate for tissue engineering mainly in the form of biomembranes, glucose or dextrin were added into a BC fermentation mannitol-based medium (BCGl and BCDe, respectively) under static culture conditions. SEM images showed effects on fiber density and porosity on both sides of the BC membranes. Both enriched media decreased the BET surface area, water holding capacity, and rehydration rate. Fourier transform infrared (attenuated total reflectance mode) spectroscopy (FTIR-ATR) analysis revealed no change in the chemical structure of BC. L929 fibroblast cells were seeded on all BC-based membranes and evaluated in aspects of cell adhesion, proliferation and morphology. BCG1 membranes showed the highest biological performance and hold promise for the use in tissue engineering applications.

Injectable PLA-based in situ forming implants for controlled release of Ivermectin a BCS Class II drug: solvent selection based on physico-chemical characterization.

In situ forming implants (ISI) prepared from biodegradable polymers such as poly(D,L-lactide) (PLA) and biocompatible solvents can be used to obtain sustained drug release after parenteral administration. The aim of this work was to study the effect of several biocompatible solvents with different physico-chemical properties on the release of ivermectin (IVM), an antiparasitic BCS II drug, from in situ forming PLA-based implants. The solvents evaluated were N-methyl-2-pyrrolidone (NMP), 2-pyrrolidone (2P), triacetine (TA) and benzyl benzoate (BB). Hansen's solubility parameters of solvents were used to explain polymer/solvent interactions leading to different rheological behaviours. The stability of the polymer and drug in the solvents were also evaluated by size exclusion and high performance liquid chromatography, respectively. The two major factors determining the rate of IVM release from ISI were miscibility of the solvent with water and the viscosity of the polymer solutions. In general, the release rate increased with increasing water miscibility of the solvent and decreasing viscosity in the following order NMP>2P>TA>BB. Scanning electron microscopy revealed a relationship between the rate of IVM release and the surface porosity of the implants, release being higher as implant porosity increased. Finally, drug and polymer stability in the solvents followed the same trends, increasing when polymer-solvent affinities and water content in solvents decreased. IVM degradation was accelerated by the acid environment generated by the degradation of the polymer but the drug did not affect PLA stability.

Solvent-induced dimensional changes in EDTA-demineralized dentin matrix.

The purpose of this study was to test the null hypothesis that the re-expansion of dried matrix and the shrinkage of moist, demineralized dentin is not influenced by polar solvents. Dentin disks were prepared from midcoronal dentin of extracted human third molars. After complete demineralization in 0.5M of EDTA (pH 7), the specimens were placed in the well of a device that measures changes in matrix height in real time. Dry, collapsed matrices were created by blowing dry N(2) on the specimens until they shrank to a stable plateau. Polar solvents [water, methanol, ethanol, n-propanol, n-butanol, formamide, ethylene glycol, hydroxyethyl methacrylate (HEMA), or mixtures of water-HEMA] as model primers then were added and the degree of re-expansion measured. These same solvents also were applied to moist, expanded matrices and the solvent-induced shrinkages measured. Regression analysis was used to test the correlations between matrix height and Hansen's dispersive, polar, hydrogen bonding, and total solubility parameters (delta(d), delta(p), delta(h), delta(t)). The results indicate that water-free polar solvents of low hydrogen bonding (H-bond) ability (e.g., neat HEMA) do not re-expand dried matrices and that they shrink moist matrices. When HEMA was mixed with progressively higher water concentrations, the model water-HEMA primers expanded the dried matrix in proportion to their water concentrations and they produced less shrinkage of moist matrices. Solvents with higher H-bonding capacities (methanol, ethanol, ethylene glycol, formamide, and water) re-expanded the dried matrix in proportion to their solubility parameters for H-bonding (delta(h)). They also induced small transient shrinkages of moist matrices, which slowly re-expanded. The results require rejection of the null hypothesis.